From the material, casters into polyurethane, nylon, rubber, super synthetic rubber, iron and other different types of products. Casters are divided into: a low center of gravity wheel, light round, medium-sized round, heavy round, super-heavy wheel, office furniture wheels, truck wheels and other series of industrial casters, widely used in mining, machinery, medical equipment, electronic equipment, engineering decoration, textile, printing, furniture, logistics equipment, warehouse, working car, chassis, cabinets, equipment, machinery, clean room, production lines, supermarkets and many other industries and in various fields.Super künstliche Gummireifenstruktur:

1, A fixed castors
Fixation with single-round, can only move along a straight line.
2, B Caster
360 degree turn of the bracket with single-round, can travel freely in any direction.
3, the installation height
Refers to the vertical distance from the ground to the installation positions, installation height refers casters casters and wheel remote backplane largest vertical distance.
4, steering bracket center distance
It refers to the vertical line to the horizontal center rivet wheel core distance from the center.
5, the turning radius
    It refers to the vertical center line of rivets to the horizontal edge of the tire from the appropriate spacing so that the casters can make a 360-degree turn. Turning radius reasonable or not directly affect the caster's life.
6, with load
    Casters when moving the load-bearing capacity. Also known as dynamic load. Dynamic load casters standards vary from test mode and factories performed and different. Also because of different materials and different wheels. The key is able to impact and shock in the structure and quality of the stent.
7, impact load
When the device was subjected to shock or vibration when the bearing casters moment load capacity.
8, the static load
    Casters in the stationary state can withstand the weight. Static load general should exercise load (dynamic bearing) of 5 to 6 times the static load impact load should be at least 2 times.
9, steering
    Hard, narrow wheels than the soft, wide wheel easier to turn. Turning radius is an important parameter wheel rotation, the turning radius is too short will increase the difficulty of steering, the wheel will result in excessive shaking and shortened life expectancy.
10, with flexibility

    Casters with flexibility influence factors are: structural steel bracket and the bracket selection, the size of the wheel, wheel type bearings. The larger wheels with flexibility as possible, on a stable ground, hard, narrow wheel than the flat side of the soft wheel effort. But on uneven ground, soft wheels effort. But on uneven ground, soft wheels to better protect the device and shock.

    Super artificial rubber tire wheel will usually have a ball bearing, they are few in between the wheels and the shaft of the ball rolling, you can make the wheels rotate smoothly. If there is no bearing, so casters up and running is quite troublesome, we can not achieve the effect of effort, so every gadget will play a very important effect, long-term to maintain a regular cleaning is important casters.